用配点法求解四边搁支板的弯曲问题

根据弹性薄板微分方程的一般解和边界条件的配点法来求四边搁支板的弯曲问题,并以对称荷载作用下的正方形板为例进行了分析计算。     

C~3I系统的决策时延分析

决策是C~3I 系统的核心问题之一。用Petri 网理论研究C~3I 系统的决策问题已取得了长足的进展。根据决策过程各阶段之所需时间具有随机性及不独立性的特点,以变迁发射时间不独立的随机Petri 网作为决策时延的建模与分析工具,并给出了这种随机Petri 网模型的一般分析方法。     

CAMAC与STD接口适配器研究

本文研究设计了一种新的CAMAC与STD的接口适配器,从而使CAMAC与STD两种标准总线系统得以兼容,该适配器以8031作为其智能核心,自动实现两种标准总线间的信息交换,其机械结构和尺寸按CAMAC的插件标准来设计,可插入CAMAC机箱中工作,同时它又是STD总线系统的控制器。     

程控精密大范围延时电路

本文介绍一种由数字集成电路构成的延时电路。该电路具有延时步距可变、延时范围大的特点。实验表明,这种电路具有很高的精度,并且容易实现。     

微波雷达目标信号模拟器及其应用

本文为在野战条件下检测雷达测距系统的性能提供一种新型微波目标信号模拟器,闸述其工作原理及功能。除在检测雷达测距系统性能上已得到实际应用外,还论述了可以进一步开发的应用项目,因为不受场地和气候条件的限制,从而获得较好的效能、效率和效益。     

实现信号衰减的程控电路

本文介绍线路设计中所应用的两种程控信号衰减电路。这两种电路容易实现,使用简便,具有较大的衰减范围,实现了信号衰减控制自动化。显示出比纯电阻手控衰减电路更优越的性能。     

Optimal control of a production‐inventory system with both backorders and lost sales

We consider the optimal control of a production inventory‐system with a single product and two customer classes where items are produced one unit at a time. Upon arrival, customer orders can be fulfilled from existing inventory, if there is any, backordered, or rejected. The two classes are differentiated by their backorder and lost sales costs. At each decision epoch, we must determine whether or not to produce an item and if so, whether to use this item to increase inventory or to reduce backlog. At each decision epoch, we must also determine whether or not to satisfy demand from a particular class (should one arise), backorder it, or reject it. In doing so, we must balance inventory holding costs against the costs of backordering and lost sales. We formulate the problem as a Markov decision process and use it to characterize the structure of the optimal policy. We show that the optimal policy can be described by three state‐dependent thresholds: a production base‐stock level and two order‐admission levels, one for each class. The production base‐stock level determines when production takes place and how to allocate items that are produced. This base‐stock level also determines when orders from the class with the lower shortage costs (Class 2) are backordered and not fulfilled from inventory. The order‐admission levels determine when orders should be rejected. We show that the threshold levels are monotonic (either nonincreasing or nondecreasing) in the backorder level of Class 2. We also characterize analytically the sensitivity of these thresholds to the various cost parameters. Using numerical results, we compare the performance of the optimal policy against several heuristics and show that those that do not allow for the possibility of both backordering and rejecting orders can perform poorly.© 2010 Wiley Periodicals, Inc. Naval Research Logistics 2010     

基于模糊模式识别的战场目标识别

分析战场目标的结构、材料、征候、特征及辐射原理等存在的差异,运用模糊模式识别方法,建立了战场目标识别的数学模型,给出了目标识别的详细步骤和方法:选取目标特征量、构造标准模糊集合、构造待识别模糊集合、应用择近原则进行目标识别,并通过算例,得到一些有价值的结论。模型和方法可供C3I系统快速准确的识别战场目标。     

The continuous‐time single‐sourcing problem with capacity expansion opportunities

This paper develops a new model for allocating demand from retailers (or customers) to a set of production/storage facilities. A producer manufactures a product in multiple production facilities, and faces demand from a set of retailers. The objective is to decide which of the production facilities should satisfy each retailer's demand, in order minimize total production, inventory holding, and assignment costs (where the latter may include, for instance, variable production costs and transportation costs). Demand occurs continuously in time at a deterministic rate at each retailer, while each production facility faces fixed‐charge production costs and linear holding costs. We first consider an uncapacitated model, which we generalize to allow for production or storage capacities. We then explore situations with capacity expansion opportunities. Our solution approach employs a column generation procedure, as well as greedy and local improvement heuristic approaches. A broad class of randomly generated test problems demonstrates that these heuristics find high quality solutions for this large‐scale cross‐facility planning problem using a modest amount of computation time. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Bayesian enhanced decision making for deteriorating repairable systems with preventive maintenance

Since a system and its components usually deteriorate with age, preventive maintenance (PM) is often performed to restore or keep the function of a system in a good state. Furthermore, PM is capable of improving the health condition of the system and thus prolongs its effective age. There has been a vast amount of research to find optimal PM policies for deteriorating repairable systems. However, such decisions involve numerous uncertainties and the analyses are typically difficult to perform because of the scarcity of data. It is therefore important to make use of all information in an efficient way. In this article, a Bayesian decision model is developed to determine the optimal number of PM actions for systems which are maintained according to a periodic PM policy. A non‐homogeneous Poisson process with a power law failure intensity is used to describe the deteriorating behavior of the repairable system. It is assumed that the status of the system after a PM is somewhere between as good as new for a perfect repair and as good as old for a minimal repair, and for failures between two preventive maintenances, the system undergoes minimal repairs. Finally, a numerical example is given and the results of the proposed approach are discussed after performing sensitivity analysis. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008